Featuring innovative coating that allows water to roll off easily, the Basin Mixer from Hansamurano is also easy to be cleaned.

Procedure for removing lime deposits on Permatec surfaces (e.g. Murano bowl)
1. Make an approx. 1% citric acid solution (available as a limescale remover from the chemist, otherwise you can
squeeze a lemon by hand; take care: do not get the citric acid solution in your eyes or in open wounds.)
2. Place a piece of paper towel or tissue on the area affected.
3. Drip citric acid solution on to the area affected (the purpose of the paper towel is to stop the solution dripping off the
area affected.
4. Allow to act for approximately 30 min., do not allow to dry, add more if necessary.
5. Remove paper towel after approx. 30 min., if necessary wipe off gently whilst the paper towel is still damp, but never
rub hard with a dry paper towel or a similar product
6. Rinse the area treated with water before using again. If limescale is still visible, repeat the process 2 – 5 times, more
if necessary.
Never use strong limescale removers which contain hydrochloric acid, phosphoric

Product Page